|
|
|
|
Blog by JasmineCorp | Create your own Blog
|
RSS Feed | Login |
gear hobs
|
Scalping Cutters By jeffwillis3 at 2010-09-25 02:07:11
|
Scalping cutters are used for scalping copper and brass strips. Brass strip scalping cutters are manufactured from 6" dia to 8" dia and length 16" to 20" in light and heavy duty. The application of scalping cutters is mainly in copper and brass industry. Some scalping cutter used for milling of plain surfaces of ferrous as well as non- ferrous metals.
There are numerous of features possessed by scalping cutters are discussed here as. These scalping cutters are available in light and heavy duty depending upon the usage of different clients. These scalping cutters are very much perfect for scalping copper and brass strips. The accuracy achieved with scalping cutters is very high and is the demand of today. Everyone wants to achieve the accuracy from the job which is the ultimate aim of the companies now days. The another feature of scalping cutters is that the finishing achieved by such cutters is very fine. The finishing is the main aspect of consideration which can be achieved through the use of scalping cutters.
Scalping Cutter is the facing cutter of brazed type and it is used to continuously rough up and down side of thin board of Copper and Copper alloy, rolled roughly in hot situation. Some companies are using imported material of high speed steel in M2 & M35 grade for the manufacturing of scalping cutters. If you want a rotary mower that is comfortable, can cut turf fast and handle any kind of terrain. Manufacturers have answered with equipment that can do it all without scalping turf down to dirt clumps.
The need for rotaries for many years, turf managers faced with mowing large acreage had few choices. They would use agriculture mowers called "shredders" that they pulled behind tractors. The industry responded by creating rotary mowers designed exclusively for the landscape turf manager. These rotary mowers - self-propelled models as well as those that implement pull-behind technology - evolved into machines that could cut all kinds of grass. Turf managers are showing their appreciation, Ninety-eight percent of all mowers sold today are rotary mowers.
Now without the scalping Until recently, rotary-mower technology was limited to higher cutting heights. At 2 inches or lower, most rotary decks would scalp turf on uneven ground. Even with floating designs, wide decks would scalp uneven terrain at lower heights. What the industry needed was a mower with all the inherent advantages of existing rotary mowers but that could cut at lower heights.
For more information about Read gear hobs and also read about shaving cutters & milling cutters
Also Read about Capital tools on ning and Capital tools industries on buzz.ready2beat |
Permalink | Comments (0) |
Comments
|
To add a comment please login by clicking here
|
|